12
15. Plug the appropriate Power Cord (17, 60) into
the Receptacle (18) located on the Base (5).
14. Set ten weight plates into the indicated slots in
the right side of the Weight Rest (42). Next, lift
the two selector pins on a Dumbbell (44), and
s
lide the selector pins to the adjustment holes
marked “1.1”. Place the Dumbbell on the weight
p
lates. Then, lift the two selector pins and slide
them to the adjustment holes marked “6.8”.
Repeat this step with the other Dumbbell (44).
17, 60
18
5
16. Make sure that all parts are properly tightened before you use the vibration platform.
14
15
44
Weight
Plates
Selector
P
ins
Slots
4
4
42
To Next Page
Loading...
Need help?
General
