9-4
Specification Summary
2. Power requirements
(mtinnued)
TABLE 9.2 - HEATER AND ELECTRICAL DATA FOR GUNS
Gun Part
No.
Description
Wattage
Voltage
VW
Resistance
(in Ohms at
75’F/24’C)
H20 Automatic Guns (all with RTD Temperature Control)
274 702 H20A 147 220/230 333 - 392
276 096 H20A 180 200 189-222
120 664 H20 LBS (%s in. ID) 147 220/230 333 - 392
276 954 H20 LBS (% in. ID) 147 220/230 333 - 392
274 728 H20 w/Micro-Adjust 147 220/230 333 - 392
276 778 H20W (water-wash) 147 220/230 333 - 392
815 138 H20 w/Filtered Body 130 220/230 392 - 465
NOTE: H20B, H20C, H20D, H20E and H20F guns are not available with RTD temperature control.
Other RTD-Temperature-Controlled Guns
NOTE: Due to the sheer number of these guns now available, refer to your Nordson Adhesives and Sealants
Equbmenf Catalog for data on H200 Automatic Guns, AD-24 Automatic Guns, the A-l Handgun, AD-31 Spray
Handguns, AD-31 Swirl Handguns, AD-31 Extrusion Handguns, and CF-200 Controlled Fiberization Automatic
Guns, or contact your Nordson representative for this information.
PM 106 701A
41-2300SP - Issued 1194
63 Nordson Corporation 1994
All Rights Reserved
To Next Page
Loading...
