IO-6
Optional Parts and Equipment
Equipment
Nordson Part No.
Description
Field-Installed Options*:
Parent Machine Interlock
Low-Level Indicator Kits:
(Flat-Bottomed Tank)
(Finned Tank)
Unit Temperature Control
Conversion Kit
Hoses and Guns
Gun Nozzles, hose filter screens and
miscellaneous fittings
Handgun Hose Support Bracket Kit
Handgun Hose Hanger Kit
Kits for Special Applications:
Temperature Setback Interface Kit
Remote Fault Condition Interface Kit
Unit Extension Kit
Single-Phase Jumper Kits:
For 200 or 230 VAC units
For 380-Y VAC units
274 658
Permits operation of the parent machine
only after the adhesive has reached ap-
plication temperature.
276 176
Provides warning when tank adhesive
276 334
level falls to refill point.
276 587
Adds either temperature setback feature
or both temperature setback and digital
readout features.
See your Adhesives and Sealants
Equipment Catalog
See your Adhesives and Sealants
Equipment Catalog
276 318 Includes bracket to prevent excessive
flexing at hose-to-applicator connection.
271 486
Includes overhead support for suspend-
ing hose, thus preventing it from drag-
ging on floor or kinking.
276 510 Allows automatic and remote operation
of already-installed temperature setback
feature.
276 575
Allcws remote indication (light, bell, etc.)
of fault condition.
276 338
Elevates unit to permit routing of hoses
underneath unit.
Required on single-phase installations.
276 084
276 236
l Parent Machine Interlock, Low-Level Indicator Kit, Temperature Setback Interface Kit and Digital Readout may also be pur-
chased as factory-installed options. See Section 8 of this manual or your Adhesives and Sealants Equipment Catalog for
Series 2300 unit part numbers with these options installed.
.
PM 106 701A
41-2300SP - Issued 1194
0 Nordson Corporation 1994
All Rights Reserved
To Next Page
Loading...
