Nordson 25B - Grounding; High Pressure Port; Siphon and High Pressure Fluid Connections

© 2024 Nordson Corporation
1044131-06
3-2
Installation
?
?
?
Apply pipe thread
adhesive/sealent
(900481) to threads
before installing.
To Siphon Port
High Pressure Port


50 cm (20 in.)
Minimum
Ground
1
2
3
4
5
6
8
6
7
8
7
Figure 3-1 
1. Elbow 2. Siphon hose 3. Male connector
4. Siphon rod 5. Strainer 6. Mounting bracket
7.  8. 
Grounding
WARNING:  The pump must be connected to a true earth ground. An ungrounded or
poorly grounded pump can store an electrostatic charge that can give personnel a

See Figure 3-1. Connect a ground wire or cable to the mounting bracket ground stud and
to a true earth ground. The resistance to ground should not exceed 20 ohms.
Siphon and High Pressure Fluid Connections
WARNING:  


Refer to 25B 4:1 Plated Steel Pump Quick Reference Guide for optional siphon

pressure connections to act as a vibration damper.
See Figure 3-1.
High Pressure Port:


Siphon Port: