3-3
Installation
© 2024 Nordson Corporation
1044131-06
• Dead-end Systems: Assemble and connect the siphon hose, rod, and strainer to the
siphon port.
• Circulating Systems: See Figure 3-2. Install an optional Single or Dual Circulation
Kit as shown. Place the drain rod in a grounded waster container. Connect the siphon
hose, rod, and strainer as shown.
• Pressure Feed Systems:
the pressure feed system.
P
P
Q
S
T
U
T
S
R
Q
U
R
Q
R
To Siphon Port
To Siphon Port
Single Circulation Kit
Dual Circulation Kit
Apply PTFE paste (900236) to
threads before installing.
Figure 3-2 Single or Dual Circulation Kit Installation
1.
kit)
2. 3. Return hose (customer-
supplied)
4. 5. Siphon hose 6. Drain hose and rod
NOTE: Items 4 and 5 are included in the optional Wall Mounting kit.
To Next Page
Loading...
