Nordson ASYMTEK User Manual

Nordson Asymtek
Mini and micro dispensing solutions for fluids and pastes
page 2 off 20
1 INTRODUCTION
Dear ladies and gentlemen!
First of all, we would like to gratulate you for buying ASYMTEK products, allowing
you to work with the latest technology. To be able to avoid malfunctions, some
important criteria now follows for commissioning your ASYMTEK product and the
servicing afterwards. Furthermore, we see it as our utmost duty to inform you about
possible dangers in accordance with the operation of your new pump.
Therefore, please note, that this manual needs to be within the near of your service
and other related personnel during, before and after operation of the pump.
We emphasise the need for reading this manual carefully and would like to point out,
that important notices relating your security will follow within the next pages of this
manual.
Understanding all notices and the technology related information allow you to operate
your latest ASYMTEK product without endangering yourself and others.
We wish you success and all the best with your newest ASYMTEK Dosing product.
The ASYMTEK dosing team

Nordson ASYMTEK Specifications

General

Fluid Types	Adhesives, underfills
Dispensing Technologies	Jet, needle
Work Area	Varies by model
Vision System	High-resolution cameras for alignment and inspection
Applications	Underfill, encapsulation, solder paste dispensing, adhesive dispensing
Material Compatibility	Compatible with a wide range of materials, including those with high viscosity or abrasive properties