Do you have a question about the Nordson ASYMTEK and is the answer not in the manual?
Fluid Types | Adhesives, underfills |
---|---|
Dispensing Technologies | Jet, needle |
Work Area | Varies by model |
Vision System | High-resolution cameras for alignment and inspection |
Applications | Underfill, encapsulation, solder paste dispensing, adhesive dispensing |
Material Compatibility | Compatible with a wide range of materials, including those with high viscosity or abrasive properties |
Guidelines for safe and compliant operation, including material compatibility and user responsibilities.
Crucial safety warnings and precautions to prevent accidents and injuries during operation and maintenance.
Key considerations and checks before initiating pump commissioning, covering safety and material compatibility.
Advice for initial pump testing, suggesting suitable fluids and highlighting potential issues during trials.
Explanation of the risks associated with dry running and methods to prevent damage to the stator due to heat.
Procedure for calibrating the pump to achieve precise volumetric dispensing, including when to recalibrate.
Guidance on the appropriate positioning and orientation of the pump for optimal performance in different applications.
Step-by-step process for bringing the pump into operation, including bleeding, calibration, and initial settings.
Table listing recommended pump speeds for various fluid viscosities and associated suction pressure limits.
Detailed instructions for assembling the aCCura-Mix pump, covering component connections and safety notes.
Procedures for safely dismantling the pump for maintenance, cleaning, or replacing worn components.
Information on the pump's leakage detection system and the necessary actions upon detecting any product leakage.