Norsup P31V/32 - Parameter List and Fault Breakdown Table

4. OPERATION AND USE
6-2 The average power curve
Temperature curve automatically updates every one hour, and the curve record can be
stored for 60 days;
Start from the latest curve saved time, if power is off and curve data collecting time is less
than one hour, the data in this period will not be saved;
4.3 Parameter list and breakdown table
(1) Electronic control fault table
Can be judged according to the remote controller failure code and troubleshooting
Protect/fault
Fault
display
Reason
Elimination methods
Standby
Non
Normal boot
Non
Inlet Temp.
P01
The temp. Sensor is broken or
Check or change the temp. Sensor