Nortel 8600 - Installing 8003, 8006, 8010 Chassis in Rack

Installing the 8003, 8006, or 8010 chassis into the rack 15
Figure 2
Removing a filler panel for 8010co chassis
—End—
Installing the 8003, 8006, or 8010 chassis into the rack
To install the 8003, 8006, or 8010 chassis into the rack:
Step Action
1
Hold each rack-mounting bracket to the side of the chassis, aligning
the screw holes (Figure 3 "Attach rack-mounting bracket to the 8010
chassis" (page 16)).
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 01.01 Standard
4.1 21 December 2006
Copyright © 2006 , Nortel Networks Nortel Networks Confidential
.