Nortel 8600 - Page 42

42 Configuration
Prompt Action
Do you want to enable WEB
server service [n] (y/n)?
Enter y if you want to enable WEB server service. Accept the
default (n), if you do not want to enable WEB server service.
IP Address for mgmt port in first
CPU Slot [192.168.168.168/255
.255.255.0]:
Enter the IP address of the management port in the first CPU
slot.
IP Address for mgmt port in
second CPU Slot [192.168.168
.169/255.255.255.0]:
Enter the IP address of the management port in the second
CPU slot.
IP Address for mgmt-virtual-ip
[0.0.0.0/0.0.0.0]:
Enter the IP address of the virtual management port. Accept
the default, 0.0.0.0/0.0.0.0, if you do not want to specify an
IP address.
First net mgmt route
[0.0.0.0:0.0.0.0]:
Enter the IP address of the first network management route.
Second net mgmt route
[0.0.0.0:0.0.0.0]:
Enter the IP address of the second network management
route (static route from the network management port to a
device in the network). For security reasons, the system does
not accept a route to a network that conflicts with the main
nonmanagement routing table, and therefore does not accept a
default route of 0.0.0.0.
Third net mgmt route
[0.0.0.0:0.0.0.0]:
Enter the IP address of the third network management route
(static route from the network management port to a device in
the network).
Fourth net mgmt route
[0.0.0.0:0.0.0.0]:
Enter an IP address of the fourth network management route
(static route from the network management port to a device in
the network).
IP address of the default VLAN
[0.0.0.0/0.0.0.0]:
Enter the IP address of the default virtual LAN (VLAN).
Do you want to save the changes
[Saving the parameters will
update the files /flash/boot.cfg
and /flash/config.cfg] (y/n)?
Enter y to save the boot and runtime configuration files. Enter
n if you do not want to save your changes.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 01.01 Standard
4.1 21 December 2006
Copyright © 2006 , Nortel Networks Nortel Networks Confidential
.