Installing the BayStack 425 Switch
21
3 Connect the BayStack 425 switch to AC power.
4 After the Nortel Networks banner is displayed, press [Ctrl ]-Y to display the
Main Menu.
At first the screen displays the Main Menu for a standalone switch. Then, if the
switch is part of a stack configuration, the screen is refreshed when the stack
forms to show the Main Menu for a stack configuration. The Main Menu for a
stack configuration includes stack features (bold text in figure).
Figure 8 shows the BayStack 425 Main Menu
Figure 8 BayStack 425 Main Menu
Figure 9 shows the BayStack 425 Main Menu for a stack configuration
BayStack 425-48T Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Display Hardware Units...
Spanning Tree Configuration...
TELNET/SNMP/Web Access Configuration...
Software Download...
Configuration File...
Display System Log...
Reset...
Reset to Default Settings...
Command Line Interface...
Logout...
Use arrow keys to highlight option, press <Return> or <Enter> to select
option.
book.book Page 21 Thursday, July 29, 2004 10:07 PM
To Next Page
Loading...
Need help?
General
