Nortel DMS-100 Series Replacement Procedures

1-980 XPM card replacement procedures
297-8021-547 Standard 14.02 May 2001
NT6X30
in an RSC-S (DS-1) Model B LCME
(continued)
frame_no
is the frame number (00 to 511) of the first LCME
lcme_no
is the number of the first LCM (0 or 1) in the frame,
site
is the LCM location (alphanumeric) of the second LCME
frame_no
is the frame number (00 to 511) of the second LCME
lcme_no
is the number of the second LCM (0 or 1) in the frame,
Example of command
>POST LCME RSC-S 14 0 RSC-S 14 1
Example of a MAP display:
Examine the other PM in the frame by typing
>NEXT
and pressing the Enter key.
Example of a MAP display:
13 Repeat step 3 through step 12 for the other PM provisioned in the equipment
frame.
If both PMs are Do
on the good RG step 14
not on the good RG step 13
.. .. .. .. .. .. .. ..
23 45 Stby 1 InSv
D
rwr: 01 23 45 67 89 01
11 11 11 RG: Pref 0 ISTb
U
nit 1: InSv /RG:1
ISTb /RG:1Unit 0:
L
CME RSC-S 14 0 ISTb Links OOS: Cside 0 Pside 0
.. .. .. .. .. .. .. ..
23 45 Stby 1 InSv
D
rwr: 01 23 45 67 89 01
11 11 11 RG: Pref 0 ISTb
U
nit 1: InSv /RG:1
ISTb /RG:1Unit 0:
L
CME RSC-S 14 1 ISTb Links OOS: Cside 0 Pside 0

Nortel DMS-100 Series Specifications

General

Capacity	Up to 100, 000 lines
Features	ISDN support
Redundancy	Yes
Signaling	SS7, ISDN
Power	-48V DC