XPM card replacement procedures 1-867
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
NT6X21
in an IOPAC ILCM
Application
Use this procedure to replace the following card in an International line
concentrating module (ILCM).
Common procedures
The common replacing a line card procedure is referenced in this procedure.
Action
The following flowchart is a summary of the procedure. To replace the card,
use the instructions in the step-action procedure that follows the flowchart.
PEC Suffixes Name
NT6X21 AA, AB,
AC, AD
Line card type C, Meridian Digital Centrex (MDC),
electronic business set
To Next Page
Loading...
Need help?
General
