Nortel DMS-100 Series Replacement Procedures

1-74 XPM card replacement procedures
297-8021-547 Standard 14.02 May 2001
NT0X91
in an RSC
Application
Use this procedure to replace the following card in an RCE frame.
Common procedures
None
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
PEC Suffixes Name
NT0X91 AA FSP alarm and converter drive circuit pack
NT0X91 AE FSP drive and protection circuit pack

Nortel DMS-100 Series Specifications

General

Capacity	Up to 100, 000 lines
Features	ISDN support
Redundancy	Yes
Signaling	SS7, ISDN
Power	-48V DC