Nortel DMS-100 Series Replacement Procedures

1-1026 XPM card replacement procedures
297-8021-547 Standard 14.02 May 2001
NT6X36
in an RLCM-EDC FSP
Application
Use this procedure to replace a card in the shelves or frames as identified in the
following table.
If you cannot identify the PEC, suffix, and shelf or frame for the card you want
to replace, refer to the Index. The maintenance manual index contains a list of
cards, shelves, and frames.
Common procedures
There are no common procedures.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
PEC Suffixes Cardname Shelf/frame name
NT6X36 AA, AB FSP alarm and control
card
FSP/RLCC
NT6X36 AC Fan alarm and control
card
FSP/RLCC

Nortel DMS-100 Series Specifications

General

Capacity	Up to 100, 000 lines
Features	ISDN support
Redundancy	Yes
Signaling	SS7, ISDN
Power	-48V DC