Operation Description
33
IMPORTANT ISSUES
1. When plowing, never adjust the traction of the farm machinery by adjusting the limit rod. Instead, reduce the
number of plowshares (blades) to match the tractor’s pulling capacity. This will help you avoid damaging the
suspension mechanism.
2. In order to avoid damage to the implement suspension mechanism when plowing, the tractor should never be
turned without lifting the farm implement it is towing.
NOTE:
The sway bars are mainly used to prevent impact on the rear wheels of the tractor caused by an overlarge
swing of the lower tie rod when the tractor turns around at the end of a field with a lifted farm implement in tow.
When the farm implements are in the plowing position, the sway bars are in a loose state. Therefore, a certain
amount of swing between the tractor and the farm implement is allowed.
To Next Page
Loading...
