Maintenance Instructions
59
WARNING Adjust the free strokes so that the left and right brake pedals are consistant, or the tractor
will turn to one side during hard braking, which can cause an accident.
4.4 Differential Lock Adjustment
Adjustment of differential lock is performed through adjustment of the bolts (1 and 2). During the adjustment, the
clearance between the right coupling (3) and left coupling (4) is about 2mm. Loosen the nut (2) and rotate the bolt
(1) inward, and the clearance increases. Rotate the bolt (1) outward, and the clearance decreases. After
adjustment, tighten the nut (2).
图
F
Figure 4-4 Differential Lock Adjustment
1. Adjustment bolt 2. Lock nut 3. Right coupling 4. Left coupling
To Next Page
Loading...
