Operation Description
41
front drive axle according to the specifications.
• Carry out the technical maintenance for the diesel engine according to the specifications of the Diesel Engine
Use and Maintenance Operation Manual.
• Drain the engine coolant then add new coolant, with a 50/50 water/antifreeze mixture. Never run the engine
without coolant in the cooling system.
• Check the toe-in of the front wheels and the free play of the clutch and brake pedals. Adjust them if
necessary.
• Check all bolts, nuts and screws and tighten if necessary.
• Add grease to each grease fitting on the tractor according to the maintenance table.
IMPORTANT ISSUES:
1. Tractors that have just left the factory, or have just been overhauled, should be broken-in before they are put into
normal service. Otherwise, their service lives will be reduced.
2. Drivers should first learn and master the operations of the tractor before doing the break-in.
To Next Page
Loading...
