Need help?Do you have a question about the Notifier FDU-80 and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | FDU-80 |
| Category | Safety Equipment |
| Language | English |
Ensures proper system operation after programming or component changes.
Information regarding radio frequency emissions and user responsibilities.
Digital apparatus compliance with Canadian radiation noise emission limits.
Details the 80-character LCD, status LEDs, piezo sounder, and function switches.
Identifies key hardware components like the piezo sounder and membrane connector.
Explains the function and settings of SW1 DIP switches for device configuration.
Illustrates standard FACP to FDU-80 connection diagrams and notes.
Describes FDU-80 display behavior upon power-up and communication faults.
Details operation of key-switch, acknowledge, silence, drill, and reset functions.
Explains the meaning of AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced LEDs.
Instructions for preparing the annunciator and selecting mounting enclosures.
Details mounting the FDU-80 in three-gang electrical boxes for semi-flush installation.
Provides instructions for surface mounting the FDU-80 using a three-gang electrical box.
Explains FDU-80 power supply options and wiring requirements.
Details the EIA-485 serial interface connections for communication.
Describes EIA-485 shield termination when cable is not run in conduit.
Details EIA-485 shield termination procedures for installations within conduit.
To Next Page