ID50 Series Panel - Operating Manual
Operator Actions at Panel
30997-264-000-8, Issue 8
January 2007
Repeat until all devices are in the required state (either
disabled or enabled). The DISABLEMENT LED
remains illuminated if one or more devices are
disabled. It is extinguished when all devices have been
enabled.
The relevant ZONE FAULT/DISABLE/TEST LED is
illuminated when all devices in that zone have been
disabled. Disablement of ALL devices is confirmed
by the ‘Fully Disabled’ LCD message.
6 Press the ‘
4
’ button to return to the Disable/Enable
menu.
To Next Page
Loading...
Need help?
General
