Need help?Do you have a question about the Notifier IFS-2600 and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | IFS-2600 |
| Category | Fire Alarms |
| Language | English |
Lists the primary hardware components and optional equipment of the IFS-2600.
Highlights key capabilities and functionalities of the IFS-2600 panel.
Recommended steps for building fire officers during an alarm event.
Details system-wide functions not specific to individual zones.
Explains functions related to individual detection zones.
Lists and describes the standard output types available on the panel.
Explains specific functions used by fire brigades for panel operation.
Lists compatible detector makes, models, types, and numbers.
Provides technical specifications, approvals, and environmental limits.
Diagram and description of the IFS-2600 panel's internal system components.
Details the panel's power supply options and configurations.
Explains the panel's technical architecture, transient suppression, and current consumption.
Procedures for final checks and powering up the installed panel.
Specifics on power supply for IFS-2005 and IFS-2006 boards.
Details for setting up the panel's internal power supply.
Lists compatible battery types and their specifications.
Steps to follow before and during the initial power-up sequence.
Specifics on power supply for NI-2017-01 and NI-2025-01 boards.
Instructions for setting up the battery charger.
List of tests to perform to verify the panel's functionality after installation.
Information on using an external power supply for larger systems.
Details the methods used for protecting the panel from transients.
Pre-power up checklist for verifying correct installation and components.
Table showing current consumption under various alarm conditions.
Steps to enter and exit the panel's programming mode.
Programming options for relay outputs and mapping.
Configuration of zone types, delays, and output settings.
Programming options for global system parameters like ACF, AVF, and Time.
Configuration of relay outputs and mapping for specific functions.
Programming options related to zone types and output configurations.
Details on different alarm zone types and their characteristics.
Steps for programming specific zone settings.
Lists programmable options for relay outputs.
Steps for programming specific relay settings.
Procedure for mapping relays to specific zone conditions.
Configuration for global relay mapping functions.
To Next Page
