Need help?Do you have a question about the Notifier AFP-100 and is the answer not in the manual?
General| Type | Fire Alarm Control Panel |
|---|---|
| Manufacturer | Notifier |
| Model | AFP-100 |
| Alarm Current | 2.5A |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Relative Humidity | 10% to 93% non-condensing |
| NAC Outputs | 4 |
| Power Supply | 120 VAC, 60 Hz, 3.0 A or 220/240 VAC, 50 Hz, 1.5 A |
| Battery Backup | 24V DC |
| Weight | 15 lbs |
| Communication Ports | RS-232, RS-485 |
A comprehensive checklist for installing, wiring, and testing the AFP-100 system.
Details on making AC power connections and earth ground connections.
General guidelines for separating and routing power-limited and nonpower-limited wiring.
Procedure to access the control panel's programming mode via the ENTER key.
Information on factory set passwords and how they control access to programming levels.
Details on Level One programming functions like Clear, Autoprogram, and New Detectors.
Procedure for programming new detectors, including ADJ, NOUN, and zone assignments.
Procedure for programming monitor modules, including Type Code selection and assignments.
Procedure for programming control modules, including Type Code selection and zone assignments.
Allows editing of device descriptor screens for addressable points.
Enables modification of system function options like Alarm Verification and SLC style.
Procedure for changing the system's Level 1 and Level 2 programming passwords.
Function for transferring the application database to/from a Windows-based computer.
Details on Level Two functions including Disable, Clear History, Walktest, Time/Date, and Check.
Procedure for performing system walktests and identifying shorted/alarm and open conditions.
Details how the system indicates and handles trouble conditions for various devices.
Describes how the system indicates and responds to alarm conditions.
Explains how to access and display device status, history, and program information.
Requirements for the dedicated AC branch circuit needed for the fire alarm system.
Information on the AFP-100's power supply capabilities for operating the system.
Table and notes for determining the required battery capacity for system standby.
Details AC power, battery, SLC, NAC, and relay specifications.
Templates for documenting detector zone assignments during programming.
Template for documenting monitor/control module zone assignments.
Details minimum and additional NFPA 72 requirements for system service types.
To Next Page
