1. Product Description
Annunciators
22
 AFP-100/AFP-100E Instruction PN 51010:C1 02/06/2002
Annunciator Fixed Modules
Provide the control panel with discrete display and control points.  Fixed modules turn their LEDs on 
and off as directed by the CPU, and also report switch activations to the CPU for action. You can only 
use one fixed module in a system.  Each annunciator’s address is fixed at address 1. Connections are 
through an EIA-485 serial connection from TB5 on the control panel.
For information and installation instructions refer to the Annunciator Fixed Module manual.
Annunciator Fixed Module - AFM-16AT 
Contains 16 red alarm and 16 yellow trouble LEDs, a system trouble LED, 
an Online/Power LED, and a local sounder, and  switches for control panel 
Acknowledge, Alarm Silence, and System Reset. Use the AFM-16AT for 
systems that require 16 or fewer annunciation points.
Annunciator Fixed Module - AFM-32A 
Contains 32 red alarm LEDs, a system trouble LED, an ON LINE/POWER 
LED, and a local panel sounder with a silence/acknowledge switch. The 
Local Silence/Acknowledge switch functions as local lamp test and silence 
for annunciator piezo.
The AFM-32A will not accept expander modules, however multiple 
annunciators may be used by setting all annunciators to Receive Only, 
except the last AFM-32A in line.
Annunciator Fixed Module - AFM-16A
The same as the AFM-32A except it has 16 red alarm LEDs.
Annunciator Devices
Annunciator Relay Control Module - ACM-8R 
Provides the control panel with a mappable relay control module. Relays 
can be selected  for mapping anywhere in the system memory map (in 
groups of eight). Provides eight Form-C relays with 5 A @ 125 VAC 
(resistive) or 30 VDC (resistive) and 2 A @ 125 VAC (inductive) contacts. 
Tracks any group of eight zones within the system. The module is 
externally mounted in an ABS-8R enclosure and is connected to the ACS 
(EIA-485) annunciator communications bus, up to 6,000 feet (1,800 m) 
away from the control panel. Power-limited, filtered, nonresettable power 
must be supplied by the FACP.
For more information and installation instructions refer to the ACM-8R 
Annunciator Relay Control Module manual.
AFM-16AT.cdr
AFM-32.cdr
12
3
45678
12
ACM-8R.cdr
Technical Manuals Online! - http://www.tech-man.com