Need help?Do you have a question about the Notifier AFP-200 and is the answer not in the manual?
General| Control Panel Type | Addressable Fire Alarm Control Panel |
|---|---|
| Auxiliary Power Output | 24 VDC, 500 mA |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Display | 80-character LCD |
| Power Supply | 120 VAC, 60 Hz |
| Capacity | 198 addressable devices |
| Notification Appliance Circuits | 2 |
| Relay Contacts | 3 (Form-C) |
| Relative Humidity | 93% non-condensing |
Details compliance with NFPA, UL, and other relevant standards for the AFP-200.
Lists the key features and capabilities of the AFP-200 control panel.
Outlines the technical specifications for power, loops, and circuits of the AFP-200.
Step-by-step instructions for mounting the control panel backbox.
Details AC power requirements and battery power connections for the AFP-200.
Explains the four Notification Appliance Circuits and releasing circuit capabilities.
Covers SLC loop wiring, isolators, monitor modules, control modules, and detectors.
Details on how to navigate and perform program changes via the control panel keypad.
Describes how the system indicates and handles trouble conditions.
Explains the system's behavior and indicators during an alarm condition.
Details system capabilities for controlling agent release or pre-action systems.
Guide on how to calculate total system current requirements for setup.
Instructions for determining the required battery capacity for backup power.
Lists minimum system components required for NFPA standard compliance.
Explains how to program zones for releasing functions like delay and cross-zoning.
Explains the AWACS™ two-level Pre-Alarm function (Alert and Action).
To Next Page
