Need help?Do you have a question about the Notifier ID60 SERIES and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | ID60 SERIES |
| Category | Fire Alarms |
| Language | English |
Describes automatic panel actions during a fire alarm and how the system responds.
Explains delayed fire alarms, panel actions, and user interaction during the delay period.
Details pre-alarm conditions and the operator's recommended actions.
Outlines automatic panel actions and operator responses to fault conditions.
Describes panel behavior and indicators during AC or battery power failure.
Overview of operator actions, access levels, and menu navigation for panel control.
Details the procedures for using Level 2 and Level 3 access codes to operate the panel.
How to silence the panel's internal buzzer and its effect on delays.
How to cancel delays, activate sounders, or initiate evacuation procedures.
How to silence or resound alarms and manage sounder output delays.
Procedure for clearing non-quiescent conditions and returning the panel to normal status.
Lists available tests accessible through the Test User Option menu.
How to perform a walk test on a specific zone, with or without sounders.
How to disable or enable system components like zones, outputs, day mode, and delays.
Procedure for disabling or enabling specific zones or individual devices within a zone.
How to disable or enable sounders, transmission device outputs, and relay outputs.
Information for Level 3 users on system configuration and preparation for handover.
To Next Page
