Need help?Do you have a question about the Notifier ID50 SERIES and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | ID50 SERIES |
| Category | Fire Alarms |
| Language | English |
Outlines the automatic panel actions and user response during a fire alarm condition.
Explains panel operation with delayed alarm activation and fire investigation periods.
Details how to use access codes and the keyswitch for Level 2 and 3 operations.
Details initiating the Evacuate procedure, cancelling delays, and activating sounders.
Explains how to stop or restart sounders during alarms and EVACUATE operations.
Describes how to clear non-quiescent conditions and return the panel to normal status.
Outlines various tests available at Access Level 2, including LEDs, LCD, and Zones.
Explains how to perform a walk test on individual zones or specific devices.
Allows users to disable or enable system parts like zones, outputs, modes, and delays.
Describes the process for disabling or enabling full zones or specific devices within a zone.
Covers the procedure for disabling or enabling sounders, transmission devices, and relay outputs.
Allows users to view system parameters like logs, devices, faults, and versions.
Details the procedure for viewing active faults currently present on the system.
Details system configuration procedures for engineers requiring Level 3 access.
Recommends daily, weekly, quarterly, and annual checks for ensuring system operational status.
To Next Page