EasyManua.ls Logo

Notifier AFP-100 - Battery (DC) Connections

Notifier AFP-100
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Installation
Power Connections
30
AFP-100/AFP-100E Instruction PN 51010:C1 02/06/2002
Battery (DC) Connections
WARNING: Battery contains sulfuric acid which can cause severe burns to the skin and eyes and
can destroy fabrics. If contact is made with sulfuric acid, immediately flush the skin or eyes with
water for 15 minutes and seek immediate medical attention.
Caution: Do NOT connect the battery interconnect wire at this time. Make this connection AFTER
initial system primary powerup.
Observe polarity when connecting the battery. Connect the battery cable to terminal J3 on the main
circuit board using the plug-in connector provided. Connect red wire to positive (+) terminal and black
wire to negative (–) terminal on opposing batteries.
Figure 8 Battery Connections
!
!
- +
BATTERY
JP1
J3
Battery Cable PN 75203
9200-DCconn.cdr
Battery Interconnect
Cable
Technical Manuals Online! - http://www.tech-man.com

Table of Contents

Related product manuals