Notifier IFS-2600 User Manual

IFS-2600 Fire Indicator Panel Section 5
Programming
DOC-01-009 44
5.3.2. Relay Programming
Select RELAY #
SELECT RELAY#
(ALL)
Use the "NEXT" & "PREVIOUS" keys to scroll through "ALL" "1" "2" "3” Up to 64 and then wrap around.
Once the desired relay number has been selected, pressing the "SELECT" button will select it. Pressing
"EXIT" at this stage will return to main menu.
RELAY Selected
RELAY #ALL
(TYPE) MAPPING
Use the "NEXT" & "PREVIOUS" keys to scroll through "TYPE" & "MAPPING". Once the desired option
has been highlighted, pressing the "SELECT" button will select it. Pressing "EXIT" at this stage will return
to "Select Relay #".
RELAY Type
RELAY #ALL TYPE
(GENERAL)
Use the "NEXT" & "PREVIOUS" keys to scroll through:
ISOLATE
ANCILLARY
BRIGADE 1
BRIGADE 2
FAULT
MAINS FAIL
GENERAL
BELL
DOOR HOLDER
MAP -AND-
MAP -OR-
MAP –FAULT-
MAP –ISOLATE-
MAP -ISOLATE/FLT-
DOOR SWITCH
RESET
Once the desired option has been highlighted, pressing the "SELECT" button will select it. Making a
selection or pressing "EXIT" will return to "Relay Selected".
NOTE:
The option previously set is displayed in brackets and is the first to be displayed.
Previously set options will not be displayed if "ALL" is selected.

Notifier IFS-2600 Specifications

General

Brand	Notifier
Model	IFS-2600
Category	Fire Alarms
Language	English