DOC-01-009 38
EXIT Programming Mode
SAVE CHANGES
YES (NO)
Use the "NEXT" & "PREVIOUS" keys to scroll through "YES" & "NO". Once the desired option has been
highlighted, pressing the "SELECT" button will select it.
Highlighting "YES" and pressing "SELECT" will write all changes made to the system memory (E
2
ROM)
and the panel will then restart.
Highlighting "NO" and pressing "SELECT" will ignore any changes made to the programming and exit back
to normal panel operation without restarting.
WARNING!!
The above action causes the panel to drop any door holders / air-conditioning if
connected.
NOTE:
This does not apply to saving changes to the time. Changes to time are saved
immediately the select key is pressed when in the time adjustment menu.
To Next Page
Loading...
