Need help?Do you have a question about the Novatel ProPak6 and is the answer not in the manual?
Provides step-by-step instructions for setting up a standard ProPak6 configuration.
Explains how to set up base and rover stations to transmit and receive GNSS correction data.
Covers the basics of data logging, including initiation, storage, and retrieval methods.
Details how to configure static IP addresses for the ProPak6 and connected computers.
Explains how to set up dynamic IP addressing for the ProPak6 using DHCP.
Guides users on setting up a base and rover configuration using Ethernet connectivity.
Describes configuring the ProPak6 as an NTRIP server or client for GNSS correction data streaming.
Covers procedures for updating firmware and enabling additional receiver features.
Provides instructions for updating receiver firmware using the WinLoad utility.
Explains how to apply authorization codes to unlock new receiver model features.
Provides step-by-step instructions for setting up a standard ProPak6 configuration.
Explains how to set up base and rover stations to transmit and receive GNSS correction data.
Covers the basics of data logging, including initiation, storage, and retrieval methods.
Details how to configure static IP addresses for the ProPak6 and connected computers.
Explains how to set up dynamic IP addressing for the ProPak6 using DHCP.
Guides users on setting up a base and rover configuration using Ethernet connectivity.
Describes configuring the ProPak6 as an NTRIP server or client for GNSS correction data streaming.
Covers procedures for updating firmware and enabling additional receiver features.
Provides instructions for updating receiver firmware using the WinLoad utility.
Explains how to apply authorization codes to unlock new receiver model features.
To Next Page
General
