14
Channel Rack
The Channel Rack pad mode lets you play up to 16 Channel Rack channels at once. Each pad
represents a single channel you can trigger using a C5 note. The pads light the channel colour for the
channel the pad is assigned to.
When you press a pad, FL Studio selects the channel and triggers audio. The pad then lights white to
show the selected channel. You can select one channel from the hardware at a time. The FLkey shows
when you have no channel selected in FL Studio.
The pad layout is left to right, bottom to top in two rows of eight.
Press Channel Rack ▼ or Channel Rack ▲ to shift the selection to the previous/next group of 8.
To Next Page
Loading...
