23
View Channel Rack Selections
Hold Shift in any pad layout mode while the FL Studio Channel Rack is visible to see the current
selection. This applies to Channel Bank Selection, Channel Rack Pot Control and Channel Selection. If
you select a Mixer Pot Mode this displays the selected mixer bank.
Loop Record (on first boot)
You can’t toggle Loop Record from FLkey, it’s set to ON the first time you connect the FLkey to FL
Studio. This ensures your current pattern loops when recording, and doesn’t extend infinitely.
To disable Loop Record, to the left of FL Studio’s main clock is an icon with a keyboard and circular
arrows. If you disable Loop Record, it stays disabled– even if you disconnect and reconnect FLkey.
Loop Record OnLoop Record Off
To Next Page
Loading...
