Need help?Do you have a question about the Novus N20K48 and is the answer not in the manual?
General| Control Algorithm | PID, On/Off |
|---|---|
| Communication | RS485 Modbus RTU |
| Input Types | Thermocouple |
| Output | Relay |
| Power Supply | 24 VAC/VDC ±10% |
| Storage Temperature | -20 to 60°C (-4 to 140°F) |
| Humidity | 20 to 85 % RH (non-condensing) |
Details the N20K48 Modular Controller's core features, inputs, outputs, and HMI.
Explains the ClickNGo modules for extending capabilities and the dock for their attachment.
Guides through power supply, input, and output electrical connections for the controller.
Details steps for panel installation, attaching the dock, and connecting modules.
Provides the physical dimensions of the N20K48 Modular Controller with and without the dock.
Explains initial startup, display information, and keyboard functions for device interaction.
Details how to navigate between configuration cycles and modify parameters using the device keys.
Details parameters configurable in the Operation Cycle, including PV, SP, and control modes.
Covers parameters for control mode, tuning, PID, and ON/OFF control strategies.
Defines alarm functions, setpoints, timers, and initial blocking for process monitoring.
Details settings for sensor type, filtering, and input ranges for the controller's analog input.
Explains function types for the controller's native output channels OUT.A and OUT.B.
Details how module functions are displayed and configured based on their position in the dock.
Covers configuration for Ramps and Soaks programs and timer functions.
Details parameters for calibration, password management, and protection levels.
Details the PC-based QuickTune software for controller configuration and management.
Describes the mobile app for configuring the controller via Bluetooth and smartphone.
Covers basic controller setup and software configuration of features like analog input and outputs.
Discusses common controller problems, error messages, and troubleshooting steps.
Provides a step-by-step guide for recalibrating the controller's analog input.
Identifies N20K48 controller models based on power supply and provides general specifications.
Lists the regulatory certifications (CE, UKCA, ANATEL, FCC) for the N20K48 Modular Controller.
To Next Page
