Need help?Do you have a question about the Novus N480 and is the answer not in the manual?
General| Communication | RS485 Modbus RTU (optional) |
|---|---|
| Input Type | 4-20 mA |
| Output | Relay |
| Power Supply | 100 to 240 Vac/dc |
| Control Action | PID, ON/OFF |
| Protection | IP65 front panel |
| Display | Dual 4-digit LED |
Instructions for physically installing the controller into a panel cutout and securing it.
Details on connecting the controller's terminals for power, sensor input, and outputs.
Specifies supported sensor types, connections, input characteristics, and accuracy.
Sets the temperature sensor low calibration (offset).
Sets the sensor input circuit gain or high calibration.
Sets the cold junction offset calibration.
To Next Page
