What to do if my Noxon Radio has no sound?
If your Noxon Radio isn't producing any sound, ensure that the sound isn't muted and increase the volume. Also, check the connector jack and remove any headphones or speakers that might be plugged in.
How to fix a Noxon Radio when no network connection can be established?
If your Noxon Radio can't establish a network connection, verify the LAN cable or the WLAN function. Try setting a static IP address on the device. Activate the DHCP function on your router and try connecting again. Also, ensure that any firewall on the network is configured to allow access for the radio.
What to do if my Noxon Radio alarm does not work?
If the alarm on your Noxon Radio isn't working, first ensure that the alarm is switched on. Problems with sound may be related to the volume setting, so refer to solutions for 'No sound'. If the alarm source is set to a station, but there's no network connection, change the alarm source or reconfigure the network connection.
How to fix WiFi connection on Noxon Radio?
To fix WiFi connection issues on your Noxon Radio, check the availability of the WLAN network on your router. Try placing the radio closer to the router. Ensure that you're using the correct password. Also, check the availability of the LAN network on the access point and reconnect or replace the LAN cable.
What to do if my Noxon Radio does not switch on?
If your Noxon Radio does not switch on, check that the power adapter is properly connected.
What to do if my Noxon Radio USB driver or MP3 player is not detected?
If your Noxon Radio isn't detecting the USB driver or MP3 player, check if the USB driver or MP3 player is properly plugged in. Some USB hard disks require an external power supply, so ensure it's connected. Note that not all MP3 players can be read directly by the device; try using a USB drive instead.
Why does my Noxon Radio have Hiss in FM mode?
If you're experiencing hiss in FM mode on your Noxon Radio, try checking or moving the FM antenna. You can also try moving the radio itself to a different location.
What to do if my Noxon Radio finds no station?
If your Noxon Radio isn't finding any stations, check the network connection, access point, and firewall settings. The station might be temporarily unavailable, so try again later or select another station. If a manually added station's link is incorrect, ensure it's correct and re-enter it. The station link may have changed, or the station may no longer be transmitting, so contact the provider for more information.
What to do if NetRemote does not show or connect to NOXON Radio?
If NetRemote doesn't show or connect to your NOXON Radio, try reopening the app. If you're streaming from multiple devices simultaneously, it may cause a crash. Reboot your NOXON Radio and/or your device.
What causes burbling or intermittent DAB mode on Noxon Radio?
If you're experiencing burbling or intermittent issues in DAB mode on your Noxon Radio, try moving the radio to a different location. Rescan for local stations, focusing on high-strength signals. Also, check the local DAB coverage in your area.
General| Type | Internet Radio |
|---|---|
| Internet Radio | Yes |
| WLAN | Yes |
| Ethernet | Yes |
| Bluetooth | No |
| USB | Yes |
| Headphone Jack | Yes |
| Display | LCD |
| Frequency Range | 87.5 - 108 MHz |
To Next Page
