Noxon A110+ - Page 46

4746
NOXON A110+
5.2.3 Network
Network wizard
Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/Skip WPS to
connect to the wireless network.
PBC Wlan setup
Push Button Conguration, it is to connect the AP that supports WPS (Wi-Fi Protected Setup).
View settings
View the information of current connected network: Active connection, MAC address, Wlan region,
DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and Secondary DNS.
Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity: Canada, Spain, France, Japan,
Singapore, Australia, and Republic of Korea.
Manual settings
Choose wired or wireless network connection and enable or disable DHCP (Dynamic Host Con-
guration Protocol).
Network prole
NOXON A110+ remembers the last four wireless networks it has connected to, and automatically
tries to connect to whichever one of them it can nd.
From here you can see the list of registered networks. You can delete unwanted networks by
turning and pressing OK or press reel then choosing YES to conrm delete.