EN-7
Shortcut to preset store 1-10 favourite stations by directly pressing numbers on the device or
remote control.
To select a preset, press FAV on the device or Preset on the remote control, then select one of the listed
preset stations. When a preset station is playing, it shows n ( 1, 2, etc.) at the bottom of the screen.
Shortcut to preset recall 1-40 favourite stations by directly pressing numbers on the remote
control or press Combined number under 40.
Now playing information
While stream/DAB/FM is playing, the screen shows information about the station. Press INFO on the
device or INFO on the remote control to view.
The device may process a large amount of data after a period of operation. No matter in which mode, it
will cause the system to freeze or malfunction.
Reboot the device if necessary.
6.3 First-time Setup
When powering on the device for the first time, it displays privacy policy information. Press OK to continue.
Then a setup wizard appears to help you set up the device's main use.
Select “YES” to confirm your selection and launch the setup wizard.
If you select “NO”, the next window will ask you choose if you want to start the setup wizard again next
time you power the device on.
The setup wizard helps you to set up the main use of the device.
Selecting the menu language - Rotate the knob to select the menu language you want from the list and
press OK to confirm.
Setting date and time - Select “12” for 12-hour display format or “24” for 24-hour display format. If you
select the 12-hour format, the display shows “AM” in the morning or “PM” in the afternoon after the time.
After this, the following options are available to define the time to be synchronised from radios: Update
from DAB, Update from FM, Update from Network, or No update
If you choose “Update from Network” you must indicate your time zone in the next window.
Next choose “ON” for summer time, otherwise select “OFF”.
If you choose “No update”, you will have to enter the date and time manually.
“AM”/“PM” displays only if you have chosen the 12-hour time format. Select “AM” for the morning hours
or “PM” for the afternoon hours.
Setting network - First, the device asks whether to keep the network connected. If you want to control the
device in all operating modes via the app, select “YES”. If you choose “NO”, it is impossible to control the
device from the app in the (Standby, AUX-IN, FM, and DAB) operating modes. Note that the power
consumption in standby mode will be higher when the network connection is kept up.
Any WLAN networks found are listed on the display, along with their names. For wired Ethernet, select
[Wired].
After selecting the WLAN/network, you will be asked to input standard encryption. To enter the network’s
key, use the reel or direction keys on the remote control to move the cursor through the characters and
press OK to confirm. As each character is selected, the key is built up near the top of the display.
Three options are accessible by tuning the navigate reel back before the first characters – Backspace, OK,
and Cancel.
To Next Page
Loading...