EN-13
8 System Settings
8.1 Equaliser
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News, and My EQ.
Press to select.
A user-defined setting is available; create your own EQ with custom bass, treble settings.
8.2 Streaming Audio Quality
Set the Streaming audio quality: Low quality, Normal quality, High quality.
8.3 Network
There will be hints for the type of network – if you plug the LAN cable, it will show one network of [wired];
if your network device supports the WPS function, it will be [WPS] before the SSID (the name of network
device). Select the one you want to connect with.
For the wireless connection, you will be asked to input encryption in the next step.
Network wizard: Enter to search AP SSID, then input the WEP/WPA key or choose Push Button/Pin/Skip
WPS to connect to the wireless network.
PBC Wlan setup: Push Button Configuration to connect the AP that supports WPS (Wi-Fi Protected Setup).
View settings: View the information of current connected network: Active connection, MAC address, Wlan
region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS, and Secondary DNS.
Manual settings: Enable or disable DHCP (Dynamic Host Configuration Protocol). Input the SSID,
WEP/WPA key, and/or other configuration.
NetRemote PIN Setup: Here you can view and edit the NetRemote PIN. The default NetRemote PIN is:
1234. The NetRemote PIN is required when you want to connect a smartphone or tablet PC to your radio
using the feature mentioned in Section
6.3.
Network profile: The device remembers the last four wireless networks it has connected to and
automatically tries to connect to whichever one of them it can find.
From here you can see the list of registered networks. You can delete unwanted networks.
Clear network settings: Select “YES” to clear all the current network settings. Select “NO” to cancel.
Keep network connected: If you choose to keep network connected, the WiFi will not disconnect even you
are in standby mode or non-network mode. This option allows the device to be ready for UNDOK and
Spotify Connect connection in any modes.
8.4 Time/Date
Set the time manually, or auto-update the time format, time zone, and daylight.
Details can be referred to Setting date and time under Section
6.3
.
First-time Setup
8.5 Language
The default language is German. Change it as your preference. Available languages: English, Czech, Danish,
Dutch, Finnish, French, German, Italian, Norwegian, Polish, Portuguese, Slovak, Spanish, Swedish, Turkish.
8.6 Factory Reset
Resetting all user settings to default values so that time and date, network configuration, and presets are
lost. However, current software version of the radio is maintained
To Next Page
Loading...