13
English
Handpiece
(optional)
Motor
Remove the Handpiece from the Motor
* Reference: "4-3 Connecting and Disconnecting the Handpiece (optional)".
* Maintenance of the Handpiece should be done in accordance with its operation manual.
3
Post-use Maintenance
Wipe the debris on the surface of the Motor and the Motor cord using a cloth moistened with water.
4
Under appropriate lighting (500 lx or higher), inspect the Motor and the Motor cord for
contamination.
If any visible contamination remains, repeat the process until it is visually clean. Be sure to repeat
from the procedure No.4.
5
≥ 500 lx
To Next Page
Loading...
