NSK NLX Plus - Preparation for Use; Connecting and Disconnecting Motor Cord and Motor

7
English
Preparation for Use
4
<Connection>
Aligning the hole on the back of the Motor and the pin on the Motor Cord Connector, insert the pin straight
into the hole and tighten the Motor Cord Nut firmly.
<Disconnection>
Loosen the Motor Cord nut. Gently separate the motor from the cord.
4-1 Connecting and Disconnecting the Motor Cord and the Motor
Hole
Pin
Motor
Motor Cord Connector
Motor Cord Nut
Tighten
Loosen