25
English
Press the ON/OFF Key for 2 seconds and
activate for
10 seconds or more to confirm
that drinking water comes out from the tip
of the Motor.
· When there is not enough drinking water,
turn off the Power Switch of the Control
Unit, take out the Water Bottle, and add
drinking water.
7
Wipe the surface of the Motor and the Motor
Cord with the disinfectant wipes (Minuten
Wipes: ALPRO).
8
Disconnect the Motor from the Motor Cord then attach the sterilized Motor to the Motor Cord and
place it on the Holder.
· Be sure to sterilize th
e rinsed Motor (Including Water Line) before use.
Reference: "6-4 Sterilization.
9
CAUTION
•
After rinsing, be sure to sterilize the Motor. Reference: "6-4 Sterilization".
Minuten Wipes: ALPRO
Post-use Maintenance
To Next Page
Loading...
