6
ENGLISH GERMAN FRENCH SPANISH ITALIAN
7
CAUTION
Do not use a pointed tool or sharp edged to clean the Cellular Glass Optic Rod. They may damage
the mirror finish and reduce the light transmission efficiency. If Cellular Glass Optic Rod end has
become damaged, return it to dealer for repair.
4-2 Removing the Bur
(
Fig.3
)
1
)
Push the push button with a thumb.
(
)
2
)
Pull out the bur.
(
)
5. Maintenance
After the treatment, be sure to perform the maintenance below.
5-1 Cleaning
(
Handpiece
)
This handpiece can be washed via Thermo Disinfector.
Scrub dirt and debris from the handpiece, and wipe clean with alcohol-immersed cotton swab or cloth. Do not use a wire brush.
Refer the manual of Thermo-Disinfector for performing it.
5-2 Cleaning
(
Z10L,Z15L,Z25L,Z85L,Z95L
)
Wipe clean the Cellular Glass Optic Rod entry point and exit point with an alcohol-immersed cotton
swab. Remove all debris and oil.
(
Fig.4
)
5-3 Lubirication and Sterilization
Refer to the Maintenance Guide OM-Z0135E.
Push Button
Cotton Swab
Glass Rod
Fig. 4
Fig. 3
To Next Page
Loading...
Need help?
General
