NSK VarioSurg 3 - Component Identification; Control Unit Overview; Operation Panel Key Functions

English
5
4
Component Names
4-1 Control Unit
(11) POWER key
(10) PROGRAM key
(9) MEMORY key
(8) AUTO CLEANING
key
MODE key
(7) SELECT key
(1) LIGHT key
(2) COOLANT
key
(3) P key
(PERIO Mode)
(4) E key
(ENDO Mode)
(5) S key
(SURG Mode)
(6) BURST key
4-1-1 Keys on the Operation Panel
(1) LIGHT key
To select the Handpiece illumination intensity: OFF / LOW / HIGH
(Default setting : HIGH)
(2) COOLANT key
To select the Coolant Flow from 5 levels.
(3) P key
To set the PERIO Mode (the mode suitable for maintenance, etc.).
(4) E key
To set the ENDO Mode (the mode suitable for the root canal treatment).
(5) S key
To set the SURG Mode (the mode suitable for cutting bones).
Handpiece Cord Connector Socket
Foot Control Cord
Connector Socket
Fuse Box
Main Power
Switch
Front Panel
LCD Display Irrigation Pump Coolant Solution
Hanger Post Holder
AC Power Cord
Connector Socket
SG Link Cable Socket
Operation Panel
9DULR6XUJ(1LQGG 