MEGAWATT CARBON BIKE MANUAL | 7
FIT PEDALS
All Nukeproof pedals are standard 9/16” x 20 tpi so are compatible with all modern cranks.
TOOLS REQUIRED
• 8mm Hex Key (All pedals) Or 15mm Spanner (Alloy pedals only)
• Torque Wrench
• Grease
HOW TO DETERMINE THE DIFFERENCE BETWEEN THE LEFT AND RIGHT PEDAL
This step is very important, failure to install the pedals on the correct side of the bike will cause irreparable damage your
crank and pedal.
ALLOY PEDALS
Alloy pedal axles are marked “L” indicating the left pedal (non-driveside) and “R” indicating the right pedal (drive-side).
LEFT PEDAL RIGHT PEDAL
PLASTIC PEDALS
Plastic pedal bodies have an “L” moulded in the body indicating the left pedal (non-driveside) and “R” moulded indicating
the right pedal (driveside).
The axles are also different, the left axle has a ring indented around the lip of the axle whereas the right does not.
LEFT PEDAL RIGHT PEDAL LEFT AXLE RIGHT AXLE
To Next Page
Loading...
