en-938821/2 5 - 79
CNC Operation
5
Exit from the procedure
Exit without interrupting the unloading procedure
Select a display page.
Unloading continues in background while other CNC functions are being used.
Stop unloading
Invoke the message prompt. ☞
Display of the message:
Abort: "9 ENTER" end of process
Exit the unloading procedure. ☞
(
9
Return to the shortened version of the "FILE UNLOADING" menu.
Unloading is interrupted.
5.9.3.2 Unloading Part Programmes to a Peripheral
Select "OTHER PROGRAMME". ☞
@
2
Display of dialogue line:
(%% OR %* OR %..) ❚
Select the programmes to be unloaded(See syntax below). ☞
Programmes to be unloaded Syntax
All programmes %%
Active programme %∗
Programme %X.Y %X.Y
All programmes with prefix %X (%X.1, %X.2...) %X
Display of the message:
Unloading in progress
Exit with message: "<<--"
The programme is unloaded to the peripheral for backup or printing.
When the unloading procedure has been completed, the following message is displayed:
Unloading completed
The programmes are backed up.
REMARK When several programmes are unloaded in the same operation, they are archived
one after the other (without Xoff characters between).
To Next Page
Loading...
