5 - 80 en-938821/2
Incidents
The selected programme does not exist
Display of the message:
PROGRAM DOES NOT EXIST
Acknowledge the message. ☞
Restart the procedure with a programme which exists.
Exit from the procedure
Exit without interrupting the unloading procedure
Select a display page.
Unloading continues in background while other CNC functions are being used.
Stop unloading
Invoke the message prompt. ☞
Display of the message:
Abort: "9 ENTER" end of process
Exit the unloading procedure. ☞
(
9
Return to the shortened version of the "FILE UNLOADING" menu.
Unloading is interrupted.
To Next Page
Loading...
