5 - 82 en-938821/2
5.9.5 Operations on the NUM Diskette Drive
Requirements
Link established with the diskette drive and presence of a serial line configured for the Kermit protocol (See C.2.3).
"Kermit" serial line selected.
The reduced "FILE LOADING" (See 5.9.2) or "FILE UNLOADING" (See 5.9.3) menu is displayed.
Actions
Select "DIALOGUE SERVICE DISKETTE". ☞
$
4
The "SERVICE DISKETTE: DIALOGUE" page is displayed with the following softkeys:
READER
DIRFILES DISK
HELP
OUT
Press the
HELP
key for help on the softkeys displayed:
KERMIT Commands
<FILE> : File management : <DIR>,<DEL>,<RENAME>,<COPY>
<DIR> : Directory management : <CD..>,<CD>,<CD\>,<MKDIR>,<TREE>
<DISK> : Diskette management : <SPACE>,<FORMAT>,<CHKDSK>
<READER> : Drive controller management : <VER>
Pressing one of the keys displays a new softkey bar (See 5.9.4.1 to 5.9.4.4). The following line is displayed in the
dialogue window:
Service_Diskette >❚
The commands described below are used to dialogue with the drive.
End of the Procedure
Exit from the "SERVICE DISKETTE: DIALOGUE" page. ☞
OUT
5.9.5.1 Drive Management
Select drive management. ☞
READER
The following softkeys are displayed:
VERREADER
HELP
OUT
ABORT
Press the
HELP
key for help on the softkeys displayed:
Help on READER commands
<VER> : Display the drive software version
<ABORT> : Abort the current command.
Displaying the Drive Software Version
Press. ☞
VER
Information is displayed on the version in the following format:
NUM-FDD MS-DOS Kermit: Vers. 07.06.1994
To Next Page
Loading...
