AXIS 8
SETTING CUE POINTS
PLAY and CUE
Pressing the “PLAY” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was
started. This is called the cue point. By alternately pressing the “PLAY” button and the “CUE” button, the disc may be returned
and played from the cue point any number of times. This function is called back cue.
PLAY, PAUSE and CUE
Pressing “Play” to start then pressing “Pause” and then “Play” again, a new cue point will be set. Pressing “Cue” will return to the
last pause position and will be the new cue point.
EDITING CUE POINT
When the jog wheel is turned while paused, a new cue point can be located. By pressing “PLAY” while paused that point will
be set. By pressing “PLAY” again (STUTTER) the point can be checked as desirable.
- The Leader in DJ Technology
©2002 Numark Industries - 9 - http://www.numark.com
To Next Page
Loading...
Need help?
General
