CDN-34
LCD DISPLAY FEATURES
1. PLAY - active while the unit is actually playing a CD.
2. PAUSE - active when the unit is paused.
3. CUE - flashing when the unit is setting a cue point. Lit
continuously when the unit is paused at a cue point.
4. PROGRAM - used for pre-programming the track order
to automatically be played by the unit. This is a great
function if you need to leave the CD player alone.
5. TIME MODE - This function is controlled by
the TIME BUTTON (4)
(Elapsed) is for showing time as it is taking place.
(Remain) first time shows how much time is left on a
particular track.
(Remain) second time shows full time remaining on CD.
6. SINGLE - shows when the unit is set to play just one
track at a time. When this is not lit, the CD will play
continuously through all tracks.This function is
controlled by the SING/CONT BUTTON (2).
7. PITCH - is lit when the display is showing.
8. TIME BAR - shows either time remaining or elapsed
depending on the setting of the TIME BUTTON (4).
9. PITCH/BPM - shows either the percentage change in pitch
or the BPM of the song depending on the mode selected with
the BPM BUTTON (16).
10. TRACK - shows the track that the unit is playing.
11. MINUTES - shows the minutes elapsed or remaining
depending on mode setting.
12. SECONDS - shows the seconds elapsed or remaining
depending on mode setting.
13. FRAMES - the CD player breaks down a second into 75
frames for accurate cueing. This shows the frames elapsed
or remaining depending on mode setting.
14. LOOP - shows when the CD is repeating a particular area
with the music on the CD.
15. RELOOP - shows when the CD has had a loop set
previously and can go back to it to loop again.
- The Leader in DJ Technology
©1999 Industries 10 http://www.numark.com
To Next Page
Loading...
