CDN-34
BEAT MATCHING USING PITCH BEND
Beat matching is necessary when the BPM’s are the same of both songs, however, the drum beats are not hitting at the
same time.
This is a description of the procedure for matching the beat of PLAYER 1 and PLAYER 2 using the PITCH BEND button.
(This procedure can be done on either PLAYER).
After matching the BPM’s adjust the pitch
temporarily as follows:
When PLAYER 2 is ahead press the --
or rotate the jog wheel counter clockwise
or
When PLAYER 2 is behind press the +
or rotate the jog wheel clockwise
or
The pitch changes automatically while the + or -- button is being pressed or the jog wheel is rotated. The faster
you rotate the wheel the more you change. Releasing the button or wheel results in a return to the original pitch. (So the
BPM’s are once again the same.)
- The Leader in DJ Technology
©1999 Industries 19 http://www.numark.com
To Next Page
Loading...
